Tank Cure Coating set 450 gr

Tank Cure Coating set. ( 450 Gram, Sufficient for a tank up to 20 litres )
Set coating + Hardener.
Solvent-free 2-component epoxy coating with excellent fuel and oil resistance. Can be applied to the inside of metal tanks. To ensure a good result, pre-treat the tank with Tank Cure Cleaner and Tank Cure De-rustifier.
Mix both components together thoroughly and fill the tank with it. Then close the filling opening. Now turn the tank slowly in all directions so that the coating reaches all points on the inside. Do this for 15 minutes and then drain off the excess liquid through the filling opening. After at least 7 days of curing at room temperature, the tank can be used again.
The mixing ratio of base/hardener in parts by weight is 100 : 50.
Pot life at 20º C is approx 15 minutes.
The minimum application temperature is 20ºC.
A 450-gram set is suitable for treating motorbike tanks of up to 15 to 20 litres.